Affiliate disclosure: SpoolQuote may earn a commission when you buy through some links on this site, at no extra cost to you. Commissions never change our numbers. How this works.
3D print quote builder
Turn slicer numbers into a customer quote. Each part is priced from your own rates, then setup, shipping, discount and tax are added. Print it, save it as a PDF, or copy it into a message.
Last updatedOct 17, 2026
PrivacyYour quote stays in this browser (saved locally). Nothing is uploaded.
Quote total to customer
Quote summary
Quote total$0.00
Your profit$0.00
Internal numbers
Your cost (parts)
$0
Machine time booked
0 h
Filament needed
0 g
Profit and cost stay on this screen; they are not printed on the quote.
Parts on this quote
Per-part numbers come from your slicer. The example rows are illustrative. For multicolor parts, add purge waste per part from multicolor purge waste.
Editable list of parts
Part
Qty
Grams each
Print hrs each
Hands-on min each
Filament $/kg
Unit price
Line total
Remove
Customer quote
How this is calculated
Cost per part = filament (grams ÷ 1,000 × $/kg) + electricity (W ÷ 1,000 × print hours × rate) + machine wear ($/hr × print hours), divided by (1 − failure rate), plus labor (hands-on minutes ÷ 60 × labor rate).
Unit price = cost per part × (1 + markup), rounded to the cent. Line total = unit price × quantity.
Discount applies to parts plus setup. Discount and tax are rounded to the cent, so the quote adds up line by line. Sales tax applies to parts plus setup after discount; shipping is shown untaxed. Whether shipping or 3D printing services are taxable depends on your state; check with your state's tax agency.
Profit = parts and setup after discount − your cost. Shipping and tax are passed through.